powered by CADENAS

Social Share

Nest box (7750 views - Architecure & BIM & MEP)

A nest box, also spelled nestbox, is a man-made enclosure provided for animals to nest in. Nest boxes are most frequently utilized for birds, in which case they are also called birdhouses or a birdbox/bird box, but some mammalian species may also use them. Placing nestboxes or roosting boxes may also be used to help maintain populations of particular species in an area. The nest box was invented by the British conservationist Charles Waterton in the early 19th century to encourage more birdlife and wildfowl on the nature reserve he set up on his estate.
Go to Article

Explanation by Hotspot Model

Nest box

Nest box

Nest box

Licensed under Creative Commons Attribution 2.0 (Kevin Cole from Pacific Coast, USA (en:User:Kevinlcole)).

A nest box, also spelled nestbox, is a man-made enclosure provided for animals to nest in. Nest boxes are most frequently utilized for birds, in which case they are also called birdhouses or a birdbox/bird box, but some mammalian species may also use them. Placing nestboxes or roosting boxes may also be used to help maintain populations of particular species in an area. The nest box was invented by the British conservationist Charles Waterton in the early 19th century to encourage more birdlife and wildfowl on the nature reserve he set up on his estate.[1]

Construction

General construction

Nest boxes are usually wooden, although the purple martin will nest in metal.[2] Some boxes are made from a mixture of wood and concrete, called woodcrete.[3]

Nest boxes should be made from untreated wood with an overhanging, sloped roof, a recessed floor, drainage and ventilation holes, a way to access the interior for monitoring and cleaning, and have no outside perches which could assist predators.[4] Boxes may either have an entrance hole or be open-fronted.[5] Some nest boxes can be highly decorated and complex, sometimes mimicking human houses or other structures. They may also contain nest box cameras so that use of, and activity within, the box can be monitored.[6]

Bird nest box construction

The diameter of the opening in a nest-box has a very strong influence on the species of birds that will use the box. Many small birds select boxes with a hole only just large enough for an adult bird to pass through. This may be an adaptation to prevent other birds from raiding it. In European countries, an opening of 2.5 cm in diameter will attract Poecile palustris, Poecile montanus; an opening of 2.8 cm in diameter will attract Ficedula hypoleuca, and an opening of 3 cm in diameter will attract Parus major, Passer montanus, an opening of 3 cm in diameter will attract Passer domesticus.[7]

The size of the nest box also affects the bird species likely to use the box. Very small boxes attract wrens and treecreepers and very large ones may attract ducks and owls. Seasonally removing old nest material and parasites is important if they are to be successfully re-used.

The material used in the construction may also be significant. Sparrows have been shown to prefer woodcrete boxes rather than wooden ones. Birds nesting in woodcrete sites had earlier clutches, a shorter incubation period, and more reproductive success, perhaps because the synthetic nests were warmer than their wooden counterparts.[8]

Placement of the nest box obviously is also significant. Some birds (including birds of prey[9][10]) prefer their nest box to be at an optimum height. Some birds (such as ducks) prefer nest sites them to be very low or even at ground level. For many birds orientation relative to the sun is of importance with many birds preferring an orientation away from direct sun and sheltered from the prevailing rain.[11]

Bat box construction

Bat boxes differ from bird nest-boxes in typical design, with the larger opening on the underside of the box, and are more often referred to as bat boxes, although in regard to the rearing of young, they serve the same purpose. Some threatened bat species can be locally supported with the provision of appropriately placed bat-boxes, however species that roost in foliage or large cavities will not use bat boxes. Bat boxes are typically made out of wood, and there are several designs for boxes with single or multiple chambers. Directions for making the open bottom bat houses for small and large colonies,[12][13] as well as locations to purchase them are available on the internet.[14] Colour and placement is important to ensuring that bat boxes are used; bat boxes that are too shaded will not heat up enough to attract a maternity colony of bats. Australian bat box projects have been running for over 12 years in particular at the Organ Pipes National Park. Currently there are 42 roost boxes using the "Stebbings Design" which have peaked at 280 bats roosting in them. The biggest problem with roosting boxes of any kind is the ongoing maintenance; problems include boxes falling down, wood deteriorating, and pests such as ants, the occasional rat, possums, and spiders.

Other creatures

Nest boxes are marketed not only for birds, but also for butterflies[15] and other mammals, especially arboreal ones such as squirrels and opossums. Depending on the animal, these boxes may be used for roosting, breeding, or both. Or, as in the case with butterflies, hibernation.[15]

Wasps may build their nests inside a nest box intended for other animals, and may exclude the intended species.

Birdhouses

See also



This article uses material from the Wikipedia article "Nest box", which is released under the Creative Commons Attribution-Share-Alike License 3.0. There is a list of all authors in Wikipedia

Architecure & BIM & MEP

Autodesk Revit, Nemetschek ArchiCAD, Nemetschek Allplan, Vectorworks, Bentley AECOMSIM, Bentley Microstation, Trimble Tekla, Trimble Sketchup, EliteCAD, Ascon Renga, BricsCAD, Hexagon, Rhinoceros CAD, Sweet Home 3D, BIM Object, BIM component, BIM library, BIM family, BIM catalog, GIS, Advanced Steel, AutoCAD MEP, linear, MagiCAD, Relux, TGA, VDI 3805, Lod100, Lod200, Lod300, Lod350, Lod400, Lod500, Loi, IFC, BuildingSmart, BIM family creation, 3D, Download, MEP BIM product library